The CamSet3P-15 is a three-position aided-reset system designed for compatible AR-15 platforms. It features Camtac’s patent-pending Reset-on-Close™ technology and provides SAFE, SEMI, and AIDED RESET selector positions.
No. The CamSet3P-15 is not a replacement trigger or drop-in trigger assembly. It is an aided-reset system designed to work in conjunction with a compatible AR-15 fire control group.
The firearm retains its existing trigger and normal SAFE and SEMI functions, with the CamSet3P-15 providing the aided-reset function when the selector is placed in the AIDED RESET position.
The CamSet3P-15 uses Camtac’s patent-pending Reset-on-Close™ technology to provide an aided trigger reset when the selector is placed in the AIDED RESET position. Unlike systems that initiate the reset during the opening or rearward portion of the operating cycle, the CamSet3P-15 performs its aided-reset function as the action closes.
When the selector is placed in SAFE or SEMI, the aided-reset components remain inactive and do not interfere with normal operation of the fire control group
Reset-on-Close is Camtac’s patent-pending operating system used in the CamSet3P-15. Unlike aided-reset systems that initiate the reset during the opening or rearward movement of the firearm’s action, the CamSet3P-15 performs its aided-reset function as the action closes and the bolt carrier returns forward.
This unique operating method is a fundamental part of the CamSet3P-15 design.
The CamSet3P-15 is designed for use with compatible AR-15 platforms equipped with a low-shelf lower receiver. Because receiver dimensions and component geometry can vary between manufacturers, compatibility cannot be guaranteed with every upper, lower, or fire control group combination.
We recommend reviewing our compatibility and installation information before purchasing or installing the CamSet3P-15.
Yes. The CamSet3P-15 requires a compatible low-shelf AR-15 lower receiver to provide the necessary clearance for the system to operate properly. High-shelf lower receivers are not compatible.
If you are unsure whether your lower receiver is low-shelf or high-shelf, review our installation information before purchasing.
The CamSet3P-15 is designed to work with standard mil-spec AR-15 triggers, but may also work with some aftermarket triggers. Because aftermarket trigger geometry varies between manufacturers and models, compatibility with aftermarket triggers cannot be guaranteed.
No. When installed in a compatible AR-15 platform, the CamSet3P-15 does not require permanent modification to the firearm or lower receiver.
The system can be removed, allowing the firearm to be returned to its original configuration.
The CamSet3P-15 is designed for straightforward installation by individuals familiar with the AR-15 platform. Professional installation is not required; however, if you are unfamiliar with AR-15 fire control components or are unsure about proper installation and function, we recommend having the system installed or inspected by a qualified gunsmith.
Always follow the Camtac installation instructions and perform the required function checks before use.
No. In the SAFE and SEMI positions, the CamSet3P-15’s aided-reset components remain inactive and do not interfere with the normal operation of the fire control group.
The aided-reset function is activated only when the selector is placed in the third, AIDED RESET position.
The CamSet3P-15 is designed as an aided-reset system for a semiautomatic firearm and does not cause the firearm to fire more than one round by a single function of the trigger.
Federal courts have ruled that the forced-reset triggers at issue in recent litigation do not meet the federal definition of a machine gun, and the Department of Justice subsequently settled the related federal litigation. justice.gov
However, state and local laws may impose additional restrictions. It is the purchaser’s responsibility to determine whether the purchase, possession, installation, and use of the CamSet3P-15 is lawful in their jurisdiction.
No. The CamSet3P-15 does not cause a firearm to fire more than one round by a single function of the trigger. A separate function of the trigger is required for each round fired.
The CamSet3P-15 is an aided-reset system designed for use with a semiautomatic firearm; it does not convert the firearm to fully automatic operation.
The CamSet3P-15 can only be shipped to states and jurisdictions where Camtac currently permits the sale and shipment of the product. Due to varying state and local laws, certain locations are restricted.
Current shipping restrictions are listed on the CamSet3P-15 product page and are also enforced during checkout. Shipping availability does not constitute legal advice or a determination that possession or use is lawful in your jurisdiction. Customers are responsible for complying with all applicable federal, state, and local laws.
No. The CamSet3P-15 is a firearm component and is not a serialized firearm. Where lawful, it can be purchased and shipped directly to the customer without transfer through a Federal Firearms Licensee (FFL).
State and local restrictions may apply, and customers are responsible for complying with all applicable laws in their jurisdiction.
Yes. The CamSet3P-15 is covered by a 12-month limited warranty against defects in materials and workmanship under normal use. The warranty does not cover damage caused by misuse, improper installation, incompatible components, unauthorized modifications, or alterations to the CamSet3P-15.
If you experience an issue that you believe is covered under warranty, contact Camtac Support for assistance.
The Camtac 12-month limited warranty covers defects in materials and workmanship under normal use.
The warranty does not cover normal wear, misuse, abuse, improper installation, use with incompatible components, failure to follow installation or operating instructions, or damage resulting from unauthorized modification or alteration of the CamSet3P-15.
If you are experiencing a problem, contact Camtac Support before modifying or attempting to repair any CamSet3P-15 component.
Yes. Unused and uninstalled CamSet3P-15 products may be returned within 30 days of delivery. Products must be in new condition and include the original packaging, hardware, instructions, and accessories.
A Return Merchandise Authorization (RMA) is required before sending any product back to Camtac. Products that have been installed, modified, or used are generally not eligible for return unless determined by Camtac to be defective in materials or workmanship.
For complete return requirements, please review our Shipping & Returns Policy.
If you’re experiencing an issue with installation or operation of your CamSet3P-15, first review the installation, compatibility, and troubleshooting information on our CamSet3P-15 How To page.
If you still need assistance, contact Camtac Support and provide details about your firearm configuration and the issue you’re experiencing. Photos or videos may also be requested to help us identify the problem and provide the appropriate support.
Installation instructions, videos, compatibility information, and troubleshooting guidance are available on our CamSet3P-15 How To page.
We recommend reviewing the installation instructions completely before installing or using the CamSet3P-15 and performing all required function checks before use.
Yes. Camtac offers dealer pricing to approved dealers. Qualified businesses can apply for a dealer account through our Dealer Program.
Once approved, dealers can log in to their Camtac account to access dealer pricing and place dealer orders directly through our website.